VOLTAGE INVERTER(for 5 Door) REMOVAL

PROCEDURE

1. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

   Click here

2. REMOVE QUARTER SCUFF PLATE RH (w/ Rear No. 2 Seat)

   Click here

3. REMOVE REAR DOOR SCUFF PLATE RH

   Click here

4. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

   Click here

5. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

6. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

   Click here

7. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

   Click here

8. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

   Click here

9. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

   Click here

10. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

11. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

12. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

13. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

14. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Click here

15. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Click here

16. REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

    Click here

17. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

18. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

19. REMOVE VOLTAGE INVERTER ASSEMBLY

    
    

    1. 

       Disconnect the connector.

    2. Remove the 2 bolts and voltage inverter.