RELAY(for Magnet Clutch Control) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT MAGNET CLUTCH RELAY

    A01XF9EE97

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      • If the result is not as specified, replace the magnet clutch relay.