HEATER ASSEMBLY REASSEMBLY

PROCEDURE


  1. INSTALL WATER HOSE SUB-ASSEMBLY C (for Dual Air Conditioning System)

    A01XM1JE02
    Text in Illustration
    *a View A
    *b Paint Marking (White)
    *c Upper Side
    *d Lower Side
    *e RH Side
    *f LH Side

    1. Align the markings on heater hose and water hose sub-assembly C as shown in the illustration and connect them with the clips.

      Note

      Do not apply excessive force to the hose.

  2. INSTALL HEATER WATER HOSE INLET K (for Single Air Conditioning System)

    A01XM1JE02
    Text in Illustration
    *a View A
    *b Paint Marking (White)
    *c Upper Side
    *d Lower Side
    *e RH Side
    *f LH Side

    1. Align the markings on heater hose and heater water hose inlet K as shown in the illustration and connect them with the clips.

      Note

      Do not apply excessive force to the hose.

  3. INSTALL HEATER WATER HOSE

    A01XEAXE02
    Text in Illustration
    *a View A
    *b Front Side
    *c Rear Side
    *d RH Side
    *e LH Side

    1. Align the markings on heater hose and heater water hose as shown in the illustration and connect them with the clips.

      Note

      Do not apply excessive force to the hose.

  4. INSTALL AIR DUCT


    1. Install the air duct with the screw.