HEATER FUEL PUMP INSTALLATION

PROCEDURE


  1. INSTALL FUEL PUMP SUB-ASSEMBLY


    1. Install the fuel pump sub-assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Align the markings on each heater fuel hose as shown in the illustration and connect them with the clips.

      Note

      Do not apply excessive force to the hose.

    3. Attach the 2 clamps.

    4. Connect the connector.

      A01XIV3E02
      Text in Illustration
      *A for Dual Air Conditioning System - -
      *a Upper Side *b Lower Side
      *c LH Side *d RH Side
      *d Marking (White) - -
      A01XDB9E02
      Text in Illustration
      *A for Single Air Conditioning System - -
      *a Upper Side *b Lower Side
      *c LH Side *d RH Side
      *e Marking (White) - -

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here