HEATER FUEL PUMP INSPECTION

PROCEDURE


  1. INSPECT FUEL PUMP SUB-ASSEMBLY

    A01XDGWE02
    Text in Illustration
    *a

    Component without harness connected

    (Fuel Pump Sub-assembly)

    1. Apply battery voltage and check the operation of the fuel pump sub-assembly, as shown in the table.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1 (E2)

      Battery negative (-) → Terminal 2 (B2)

      		 Fuel pump Sub-assembly operates smoothly

      If the result is not as specified, replace the fuel pump sub-assembly.