AIR CONDITIONING PRESSURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 PRESSURE SWITCH


    1. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 pressure switch.

      Compressor oil
      ND-OIL 8 or equivalent

    2. Install the O-ring to the No. 1 pressure switch.

    3. B001DTFE03
      Text in Illustration
      *a Hold
      *b Turn

      Install the No. 1 pressure switch.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

    4. Connect the connector.

  2. INSTALL AIR CONDITIONING PRESSURE SENSOR


    1. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the air conditioning pressure switch.

      Compressor oil
      ND-OIL 8 or equivalent

    2. Install the O-ring to the air conditioning pressure switch.

    3. B001DTFE03
      Text in Illustration
      *a Hold
      *b Turn

      Install the air conditioning pressure switch.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

    4. Connect the connector.

  3. CHARGE REFRIGERANT

    Click here

  4. WARM UP ENGINE

    Click here

  5. CHECK FOR REFRIGERANT GAS LEAK

    Click here

  6. INSTALL RADIATOR GRILLE


    1. Install the radiator grille Click here.

  7. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here