REAR EVAPORATOR TEMPERATURE SENSOR DISASSEMBLY

PROCEDURE


  1. REMOVE REAR SIDE NO. 4 AIR DUCT (w/ Rear Air Duct)

    Click here

  2. REMOVE REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY

    Click here

  3. REMOVE COOLER BRACKET

    Click here

  4. REMOVE REAR MODE DAMPER SERVO SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

    Click here

  6. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

    Click here

  7. REMOVE HEATER BRACKET

    Click here

  8. REMOVE REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY

    Click here

  9. REMOVE BLOWER MOTOR CONTROLLER

    Click here

  10. REMOVE REAR COOLING UNIT EXPANSION VALVE

    Click here

  11. REMOVE REAR EVAPORATOR SUB-ASSEMBLY

    Click here

  12. REMOVE REAR EVAPORATOR TEMPERATURE SENSOR


    1. A01XDQ6

      Move the tip of the sensor in the direction indicated by the arrow in the illustration to remove it from the bracket plate.

    2. Detach the 2 claws and remove the sensor.