AIR CONDITIONING AMPLIFIER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

      Click here

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

  2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

    Click here

  3. REMOVE COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

    Click here

  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    1. B001ETK

      Remove the front door opening trim weatherstrip RH in the range shown in the illustration.

  6. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  7. REMOVE INSTRUMENT PANEL ORNAMENT

    Click here

  8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  9. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

    Click here

  10. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY (for LHD, w/ Auto Wiper)

    Click here

  11. REMOVE TELEPHONE TRANSCEIVER ASSEMBLY (for LHD, w/ Telematics Transceiver, w/o Double Door Lock)

    Click here

  12. REMOVE TELEPHONE TRANSCEIVER ASSEMBLY WITH DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (for LHD, w/ Telematics Transceiver, w/ Double Door Lock)


    1. B001IGQC01
      B001CHY Bolt
      B001DEF Nut
      B001HIB Connector

      Remove the bolt and nut.

    2. Disconnect the 4 connectors and remove the telephone transceiver assembly with double lock door control relay assembly.

  13. REMOVE ECU INTEGRATION BOX RH (for LHD)


    1. B001F9Z

      Disconnect the 9 connectors.

    2. Detach the 2 clamps.

    3. B001GH6C01
      B001CHY Bolt
      B001DEF Nut

      Remove the 2 nuts, bolt and ECU integration box RH.

  14. REMOVE ECU INTEGRATION BOX LH (for RHD)


    1. B001DNK

      Disconnect the 9 connectors.

    2. Detach the 2 clamps.

    3. B001EC1C01
      B001CHY Bolt
      B001DEF Nut

      Remove the 2 nuts, bolt and ECU integration box LH.

  15. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

    B001FX5C01
    *A for LHD
    *B for RHD

    1. Detach the 2 claws and remove the air conditioner amplifier assembly.