CONDENSER FAN REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  3. REMOVE RADIATOR GRILLE

    Click here

  4. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  5. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  6. REMOVE HOOD LOCK ASSEMBLY


    1. for LHD:

      Remove the hood lock assembly Click here.

    2. for RHD:

      Remove the hood lock assembly Click here.

  7. REMOVE HOOD LOCK SUPPORT BRACE SUB-ASSEMBLY


    1. B001D0H

      Detach the the each clamp.

    2. Remove the 4 bolts and hood lock support brace sub-assembly.

  8. REMOVE AIR CONDITIONING TUBE ASSEMBLY

    B001EAN

    1. Disconnect the connector.

    2. Detach the clamp, remove the 2 bolts and the air conditioning tube and accessory assembly.

      Tech Tips

      It is not necessary to completely remove the air conditioning tube. Move the tube so that the shroud blower assembly can be removed.

    3. Remove the O-ring from the air conditioning tube and accessory assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  9. REMOVE SHROUD BLOWER ASSEMBLY

    B001GPG

    1. Disconnect the connector.

    2. Remove the bolt and shroud blower assembly as shown in the illustration.