COMPRESSOR(for 1KD-FTV) INSPECTION

PROCEDURE


  1. INSPECT MAGNETIC CLUTCH ASSEMBLY


    1. Check the magnet clutch operation.

      A01XLEEE02
      Text in Illustration
      *A except Cold Area Specification Vehicles *B for Cold Area Specification Vehicles
      *1 Magnet Clutch Rotor *2 Magnet Clutch Hub
      *3 Battery - -
      *a

      Component without harness connected

      (Magnet Clutch Assembly)

      		 - -

      1. Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch and the negative lead is connected to the ground wire.

        If the operation is not as specified, replace the magnet clutch assembly.

    2. Measure the resistance between terminals 1 and 2.

      Standard resistance
      65 to 125 Ω at 20°C (68°F)
      If the resistance is not as specified, replace the cooler compressor assembly.