PTC HEATER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT QUICK HEATER ASSEMBLY


    1. A01XIPEE06
      Text in Illustration
      *1 Connector A
      *2 Connector B
      *3 Connector C
      *a

      Component without harness connected

      (Quick Heater Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1 - B-1 23 to 25°C (73 to 77°F) 0.5 to 2.5 Ω
      A-2 - B-1 23 to 25°C (73 to 77°F) 0.5 to 2.5 Ω
      A-2 - C-1 23 to 25°C (73 to 77°F) 0.5 to 2.5 Ω
      A-3 - C-1 23 to 25°C (73 to 77°F) 0.5 to 2.5 Ω

      If the result is not as specified, replace the quick heater assembly.