REAR CENTER SEAT INNER BELT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

   

   Text in Illustration

   *a	Protruding Part

   
   

   1. Connect the belt with the bolt.

      Torque:

      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear No. 1 seat outer belt to overlap the protruding parts of the seat cushion frame.

2. INSTALL REAR NO. 2 SEAT HINGE COVER RH

   Click here

3. INSTALL REAR NO. 2 SEAT HINGE COVER LH

   Click here

4. INSTALL REAR SEAT CUSHION UNDER COVER SUB-ASSEMBLY LH

   Click here

5. INSTALL REAR SEAT CUSHION SUPPORT SPRING

   Click here

6. INSTALL FOLD SEAT LEG LOCK CUSHION

   Click here

7. INSTALL REAR SEAT CUSHION EDGE PROTECTOR

   Click here

8. INSTALL REAR SEAT HINGE SUB-ASSEMBLY RH

   Click here

9. INSTALL REAR SEAT STAY SUB-ASSEMBLY

   Click here

10. INSTALL REAR SEAT HINGE SUB-ASSEMBLY LH

    Click here

11. INSTALL REAR SEAT HINGE PAWL GUIDE

    Click here

12. INSTALL SEAT TRACK OPEN LEVER PIN SUB ASSEMBLY

    Click here

13. INSTALL RECLINING ADJUSTER INSIDE COVER LH

    Click here

14. INSTALL REAR NO. 2 SEAT CUSHION

    Click here

15. INSTALL REAR NO. 1 SEAT RECLINING COVER RH

    Click here

16. INSTALL REAR SEAT RECLINING COVER LH

    Click here

17. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

    
    

    1. Install the rear No. 1 seat assembly LH Click here.