REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for 3 Door) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  2. REMOVE MAT SET PLATE COVER

    Click here

  3. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

  4. REMOVE QUARTER TRIM COVER HOLE LH

    Click here

  5. REMOVE REAR FLOOR CARPET ASSEMBLY

    Click here

  6. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  7. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Click here

  8. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Click here

  9. REMOVE OUTER LAP BELT ANCHOR COVER

    Click here

  10. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. B001H90

      Remove the bolt and disconnect the front seat outer belt floor anchor.

    2. B001ILH

      Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

    3. Remove the 3 bolts and 2 screws.

    4. Detach the 9 claws and 12 clips and remove the deck trim side panel.

      B001HCH

  11. REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH

    Click here

  12. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. B001CQH

      Remove the bolt and rear No. 1 seat outer belt shoulder anchor.

    2. B001CJ9

      Remove the 2 bolts and rear No. 1 seat outer belt assembly.