REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for 5 Door) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    B001C85E03

    Note

    When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.


    1. Align the seat belt positioning holes with the claws and install the retractor of the seat belt with the 2 bolts as shown in the illustration.

      Tech Tips

      First install bolt A, and then install bolt B.

      Torque:
      for bolt A
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
      for bolt B
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. Install the rear No. 1 seat outer belt shoulder anchor with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY LH (for 60/40 Split Double-folding Seat Type LH Side)

    Click here

  3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Click here

  4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. w/o Rear No. 2 Seat:


      1. Pass the rear seatback lock control lever base through the deck trim side panel.

      2. Attach the 5 clips and 8 claws to install the deck trim side panel.

      3. Install the 4 bolts and 2 screws.

      4. Attach the 6 claws and 2 guides to install the rear seatback lock control lever base to the deck trim side panel.

      5. Install the rear No. 1 seat outer belt floor anchor with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. w/ Rear No. 2 Seat:


      1. Attach the 4 clips and 8 claws to install the deck trim side panel.

      2. Install the 2 bolts and 2 screws.

      3. Install the rear No. 2 seat outer belt floor anchor with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      4. Install the rear No. 1 seat outer belt floor anchor with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  5. INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

  6. INSTALL ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

    Click here

  7. INSTALL FRONT DECK SIDE TRIM COVER LH (w/ Tonneau Cover)

    Click here

  8. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Click here

  9. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  10. INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  11. INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  12. INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

  13. INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

  14. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

    Click here

  15. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  16. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

    Click here

  17. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  18. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  19. INSTALL QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)

    Click here

  20. INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

    Click here

  21. INSTALL REAR SEATBACK ASSEMBLY LH (for 60/40 Split Double-folding Seat Type LH Side)


    1. Install the rear No. 1 seatback assembly LH Click here.

  22. INSTALL REAR NO. 2 SEAT ASSEMBLY LH


    1. for Manual Seat Type:

      Install the rear No. 2 seat assembly LH Click here.

    2. for Power Seat Type:

      Install the rear No. 2 seat assembly LH Click here.

    3. for Face to Face Seat Type:

      Install the rear No. 2 seat assembly LH Click here.