REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for 5 Door) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR NO. 2 SEAT ASSEMBLY LH


    1. for Manual Seat Type:

      Remove the rear No. 2 seat assembly LH Click here.

    2. for Power Seat Type:

      Remove the rear No. 2 seat assembly LH Click here.

    3. for Face to Face Seat Type:

      Remove the rear No. 2 seat assembly LH Click here.

  2. REMOVE REAR SEATBACK ASSEMBLY LH (for 60/40 Split Double-folding Seat Type LH Side)


    1. Remove the rear seatback assembly Click here.

  3. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

    Click here

  4. REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)

    Click here

  5. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. Partially remove the rear door opening trim weatherstrip so that the front quarter trim panel assembly LH and deck trim side panel assembly LH can be removed Click here.

  7. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

    Click here

  8. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  9. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

    Click here

  10. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

  11. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

  12. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  13. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  14. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  15. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Click here

  16. REMOVE FRONT DECK SIDE TRIM COVER LH (w/ Tonneau Cover)

    Click here

  17. REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

    Click here

  18. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

  19. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. B001IJX

      w/o Rear No. 2 Seat:


      1. Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

      2. B001GI3

        Detach the 6 claws and 2 guides and disconnect the rear seatback lock control lever base.

      3. Remove the 4 bolts and 2 screws.

      4. Detach the 5 clips and 8 claws.

      5. Pass the rear seatback lock control lever base through the deck trim side panel and remove the deck trim side panel.

        B001H9K

    2. w/ Rear No. 2 Seat:


      1. B001IJX

        Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

      2. B001COG

        Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

      3. B001E5C

        for RH Side:

        Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

      4. Detach the 4 clips and 8 claws and remove the deck trim side panel.

        B001EKP

  20. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Click here

  21. REMOVE REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY LH (for 60/40 Split Double-folding Seat Type LH Side)

    Click here

  22. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. B001CH6

      Remove the nut and rear No. 1 seat outer belt shoulder anchor.

    2. B001CJ9

      Remove the 2 bolts and rear No. 1 seat outer belt assembly.