REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

    A01XLBDE05
    Text in Illustration
    *a Protruding Part

    1. Install the inner belt with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  2. INSTALL REAR SEAT CUSHION MOULDING RH

    Click here

  3. INSTALL REAR SEAT ASSEMBLY RH


    1. Install the rear seat assembly RH Click here.