REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE REAR SEAT ASSEMBLY LH


    1. Remove the rear seat assembly LH Click here.

  2. REMOVE REAR SEAT UPPER RECLINING COVER LH

    Click here

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  4. REMOVE CENTER SEAT HINGE COVER LH

    Click here

  5. REMOVE REAR SEAT CUSHION MOULDING LH

    Click here

  6. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

    Click here

  7. REMOVE SEAT CUSHION COVER WITH PAD

    Click here

  8. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    A01XES0

    1. Remove the bolt and inner belt and disconnect the 3 point type belt anchor.