FRONT CENTER SEAT OUTER BELT(for Bench Seat Type) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER RH

    Click here

  2. REMOVE FRONT INNER SEAT TRACK BRACKET COVER RH

    Click here

  3. REMOVE SEAT TRACK COVER RH

    Click here

  4. REMOVE INNER SEAT TRACK BRACKET COVER RH

    Click here

  5. REMOVE FRONT SEAT LAP OUTER BELT SUB-ASSEMBLY


    1. A01XL2S

      Remove the bolt and disconnect the front seat lap outer belt sub-assembly from the floor.

    2. Remove the front seat assembly RH.

      Tech Tips

      In order to perform work under the seat, it is not necessary to remove the seat from the cabin. Simply tilt the seat backward.


      1. A01XFIM

        Remove the 2 bolts.

      2. Operate the seat track adjusting handle and move the seat to the rearmost position.

      3. A01XERA

        Remove the 2 bolts.

      4. Disconnect the connector and detach the wire harness clamp from under the seat.

      5. Tilt the front seat assembly RH backward while being careful not to damage the vehicle interior or wire harnesses with the seat frame.

    3. A01XHIBE02
      Text in Illustration
      *1 Band of Front Seat Inner Belt Assembly RH

      Pass the front seat lap outer belt sub-assembly through the band of the front seat inner belt assembly RH and remove it by pulling it up through the seat.