REAR CENTER SEAT OUTER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY RH

   

   Text in Illustration

   *1	Bolt
   *2	Nut

   Note

   When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.

   
   

   1. Align the claws with the seat belt positioning holes and install the retractor of the seat belt with the nut and bolt as shown in the illustration.

      Tech Tips

      First install the bolt, and then install the nut.

      Torque:

      for bolt

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      for nut

      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

2. INSTALL REAR SEAT SHOULDER BELT GUIDE

   Click here

3. INSTALL REAR SEATBACK EDGE PROTECTOR

   Click here

4. INSTALL SEATBACK COVER WITH PAD

   Click here

5. INSTALL REAR SEAT LOCK STRIKER

   Click here

6. INSTALL REAR SEATBACK LOCK STRIKER PROTECTOR

   Click here

7. INSTALL REAR SEAT SHOULDER BELT COVER

   Click here

8. INSTALL SEAT BELT ANCHOR COVER CAP

   Click here

9. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

   Click here

10. INSTALL REAR SEATBACK STOP BUTTON GROMMET

    Click here

11. INSTALL REAR SEATBACK LOCK ASSEMBLY RH

    Click here

12. INSTALL REAR SEATBACK LOCK COVER RH

    Click here

13. INSTALL CENTER NO. 2 SEATBACK COVER

    Click here

14. INSTALL CENTER SEATBACK ASSEMBLY

    Click here

15. INSTALL CENTER SEATBACK COVER SUB-ASSEMBLY

    Click here

16. INSTALL REAR SEAT CENTER INNER BELT ASSEMBLY

    Click here

17. INSTALL REAR SEAT INNER RECLINING COVER RH

    Click here

18. INSTALL NO. 1 SEATBACK BOARD SUB-ASSEMBLY

    Click here

19. INSTALL REAR SEAT ASSEMBLY RH

    
    

    1. Install the rear No. 1 seat assembly RH Click here.