OCCUPANT DETECTION SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Bench Seat Type)


    1. A01XFNME03
      Text in Illustration
      *1 Hog Ring Pliers
      *2 Tack pin

      Using hog ring pliers, install the separate type front seat cushion pad to the separate type front seat cushion cover with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. Using a tacker, install the separate type front seat cushion cover to the separate type front seat cushion pad with a new tack pin as shown in the illustration.

    3. A01XHV8E02
      Text in Illustration
      *1 Hook
      *2 Hog Ring
      *3 Hog Ring Pliers

      Attach the hook.

    4. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.

      Note

      When installing the hog rings, avoid wrinkling the cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Separate Seat Type)


    1. B001CPLE02
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install the separate type front seat cushion pad (occupant detection sensor) to the separate type front seat cushion cover with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. A01XIRXE02
      Text in Illustration
      *1 Hog Ring Pliers

      Type A:


      1. Using hog ring pliers, connect the straps with new hog rings.

    3. A01XCT6E03
      Text in Illustration
      *1 Tack Pin

      Type B:


      1. Connect the straps with new tack pins.

  3. INSTALL FRONT SEAT CUSHION COVER WITH PAD (for Bench Seat Type)

    Click here

  4. INSTALL FRONT SEAT CUSHION COVER WITH PAD (for Separate Seat Type)

    Click here

  5. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Bench Seat Type)

    Click here

  6. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Separate Seat Type)

    Click here

  7. INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Separate Seat Type)

    Click here

  8. INSTALL FRONT SEAT CUSHION SHIELD RH (for Power Seat)

    Click here

  9. INSTALL FRONT SEAT CUSHION SHIELD RH (for Bench Seat Type)

    Click here

  10. INSTALL FRONT SEAT CUSHION SHIELD RH (for Manual Seat)

    Click here

  11. INSTALL RECLINING POWER SEAT SWITCH KNOB (for Power Seat)

    Click here

  12. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)

    Click here

  13. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (for Bench Seat Type)

    Click here

  14. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)

    Click here

  15. INSTALL FRONT SEAT ASSEMBLY RH


    1. for Manual Seat:

      Install the front seat assembly RH Click here.

    2. for Power Seat:

      Install the front seat assembly RH Click here.

    3. for Bench Seat Type:

      Install the front seat assembly RH Click here.