POWER SEAT CONTROL ECU(for Rear No. 2 Seat) REMOVAL

CAUTION / NOTICE / HINT

Note


  • If the fold seat control ECU is replaced with a new one, perform initialization (initial position memorization) of the fold seat control ECU Click here.

  • If the fold seat control ECU is exchanged with one from another vehicle, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU Click here.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY

    Click here

  2. REMOVE FOLD SEAT CONTROL ECU


    1. A01XFEY

      Disconnect the 2 connectors.

    2. Remove the 2 nuts and ECU.