REAR SEAT CUSHION HEATER(for 60/40 Split Slide Walk-in Seat Type RH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY

    A01XEC8E01
    Text in Illustration
    *1 Connector A
    *2 Connector B
    *a

    Component without harness connected

    (Rear Seat Cushion Heater Assembly)

    1. Check the rear seat cushion heater assembly.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A-1 - B-1 Seat cushion heater temperature 20°C (68°F) 3.4 to 4.2 Ω
        A-4 - B-2
        A-1 - A-4
        A-2 - A-3 8 to 12 kΩ

        If the result is not as specified, replace the rear seat cushion heater assembly.