REAR SEAT CUSHION HEATER(for 60/40 Split Slide Walk-in Seat Type LH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY

    A01XFLCE02
    Text in Illustration
    *1 Tack Pin
    *2 Name Stamp

    1. Set the rear seat cushion heater assembly in place with the name stamp side facing the separate type rear seat cushion cover.

    2. Install the rear seat cushion heater assembly with 23 new tack pins.

  2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER

    Click here

  3. INSTALL REAR NO. 2 SEAT PROTECTOR

    Click here

  4. INSTALL SEAT CUSHION COVER WITH PAD

    Click here

  5. INSTALL REAR SEAT CUSHION MOULDING LH

    Click here

  6. INSTALL CENTER SEAT HINGE COVER LH

    Click here

  7. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  8. INSTALL REAR SEAT UPPER RECLINING COVER LH

    Click here

  9. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

    Click here