FRONT SEAT CUSHION HEATER(for Walk in Seat Type) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH

    A01XDQZE01
    Text in Illustration
    *1 Connector A
    *2 Connector B
    *a

    Component without harness connected

    (Front Seat Cushion Heater)

    1. Check the seat cushion heater.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A-1 - B-1 Seat cushion heater temperature 20°C (68°F) 3.4 to 4.2 Ω
        A-4 - B-2
        A-1 - A-4
        A-2 - A-3 8 to 12 kΩ

        If the result is not as specified, replace the seat cushion heater assembly.

  2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

    A01XLRAE01
    Text in Illustration
    *1 Connector A
    *2 Connector B
    *a

    Component without harness connected

    (Front Seat Cushion Heater)

    1. Check the seat cushion heater.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A-1 - B-1 Seat cushion heater temperature 20°C (68°F) 3.4 to 4.2 Ω
        A-4 - B-2
        A-1 - A-4
        A-2 - A-3 8 to 12 kΩ

        If the result is not as specified, replace the seat cushion heater assembly.