CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
REMOVE FRONT SEAT ASSEMBLY
Remove the front seat assembly Click here.
REMOVE RECLINING ADJUSTER RELEASE HANDLE LH
REMOVE VERTICAL ADJUSTING HANDLE LH (for Driver Side)
REMOVE FRONT SEAT CUSHION SHIELD LH
REMOVE FRONT SEAT INNER CUSHION SHIELD LH
REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side)
REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
for Driver Side:
for Front Passenger Side:
REMOVE SEAT CUSHION COVER WITH PAD
Remove the rubber band from the seat cushion spring.
Disconnect the seat heater connector and detach the wire harness clamp.
| *1 | Fastening Tape |
w/ Front Seat Side Airbag:
Detach the fastening tape and open the cover.
Disconnect the airbag wire harness.
for Clip Type:
Using a moulding remover, remove the 2 clips.
for Hook Type:
Detach the 2 hooks.
Disconnect the seat heater connector and detach the 3 wire harness clamps.
Detach the hooks.
for Front Passenger Side:
Detach the claw and disconnect the connector.
Remove the seat cushion cover with pad.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH
| *1 | Tack Pin |
Cut off the tack pins and remove the front seat cushion heater from the front seat cushion cover.