POWER SEAT SWITCH(for Rear No. 2 Seat) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE SWITCH BEZEL


    1. A01XDU7E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the switch bezel.

    2. Using a moulding remover, detach the 2 claws.

    3. A01XFWL

      Disconnect the connector and remove the switch bezel.

  2. REMOVE REAR POWER SEAT SWITCH


    1. A01XLVM

      Detach the 2 claws and remove the switch from the switch bezel.

  3. REMOVE NO. 1 FOLD SEAT SWITCH ASSEMBLY


    1. A01XEL6
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the No. 1 fold seat switch assembly.

    2. Using a moulding remover, detach the 2 claws.

    3. A01XHG1

      Disconnect the 2 connectors and remove the fold seat switch.

  4. REMOVE REAR POWER SEAT SWITCH


    1. A01XKRK

      Detach the 2 claws and remove the switch from the fold seat switch.