SEAT MEMORY SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT MEMORY SWITCH (for LHD)

    A01XDCGE01
    Text in Illustration
    *1 SET Switch
    *2 1 Switch
    *3 2 Switch
    *a

    Component without harness connected

    (Seat Memory Switch)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (M1) - 1 (E) 1 switch pressed Below 1 Ω
      4 (M2) - 1 (E) 2 switch pressed
      2 (MRY) - 1 (E) SET switch pressed

      If the result is not as specified, replace the seat memory switch.

  2. INSPECT SEAT MEMORY SWITCH (for RHD)

    A01XF0IE01
    Text in Illustration
    *1 SET Switch
    *2 1 Switch
    *3 2 Switch
    *a

    Component without harness connected

    (Seat Memory Switch)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (M1) - 1 (E) 1 switch pressed Below 1 Ω
      4 (M2) - 1 (E) 2 switch pressed
      2 (MRY) - 1 (E) SET switch pressed

      If the result is not as specified, replace the seat memory switch.