REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR SEAT SIDE COVER LH


    1. A01XMBLE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear seat side cover.

    2. Using a moulding remover, detach the 4 claws and remove the cover.

  2. REMOVE REAR NO. 2 SEAT ASSEMBLY LH


    1. A01XIJIE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and open the cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01XCPXE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and open the cover.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01XCSH

      Remove the 3 bolts.

    4. A01XJVX

      Fold the seat cushion.

    5. Attach the rear side seat band and fix the seat cushion in place.

    6. Remove the nut and rear No. 2 seat assembly from the vehicle.

      Note

      Be careful not to damage the vehicle body.