REAR SEATBACK HEATER(for 60/40 Split Slide Walk-in Seat Type LH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEATBACK HEATER ASSEMBLY

    A01XEP7E01
    Text in Illustration
    *a

    Component without harness connected

    (Rear Seatback Heater Assembly)

    1. Check the rear seatback heater assembly.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Seatback heater temperature 20°C (68°F) 7.4 to 9.0 Ω

        If the result is not as specified, replace the rear seatback heater assembly.