FRONT SEATBACK HEATER(for Walk in Seat Type) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY


    1. Remove the front seat assembly Click here.

  2. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. B001GLQ

      Remove the rubber band from the seat cushion spring.

    2. A01XFBM

      Disconnect the seat heater connector and detach the wire harness clamp.

    3. A01XKHH

      Remove the 3 hog rings.

    4. Open the 2 fasteners, and then open the seatback cover.

      B001D85E01
      Text in Illustration
      *A for Cloth Seat *B for Leather Seat
    5. A01XEYO

      w/ Front Seat Side Airbag:


      1. Remove the nut and seatback cover bracket from the seat frame.

      2. Disconnect the seatback cover bracket from the seatback pad.

    6. B001I6P

      Using a screwdriver, detach the 4 claws and remove the 2 headrest supports.

    7. Remove the hog rings and front seatback cover.

      Tech Tips

      The number of hog rings differs according to seat type.

      B001EI4E01
      Text in Illustration
      *A for Type A *B for Type B

  3. REMOVE FRONT SEATBACK HEATER ASSEMBLY RH


    1. B001CWBE01
      Text in Illustration
      *1 Tack Pin

      Cut off the tack pins which fasten the seatback heater to the seatback cover, and then remove the seatback heater from the seatback cover.