REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL REAR SEAT ASSEMBLY LH

    A01XJ77E01

    1. Place the rear seat assembly LH in the cabin.

      Note

      Be careful not to damage the vehicle body.

      Tech Tips

      Be sure to install the seat with the seatback folded down.

    2. Connect the center inner belt to the rear seat assembly.

    3. Temporarily install the seat with the 5 bolts and nut.

    4. Tighten the bolts and nut in the order indicated in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    5. w/ Seat Heater System:

      Connect the seat heater connector.

  2. INSTALL SEAT TRACK COVER LH

    A01XG4T

    1. Attach the 3 clips to install the seat track cover LH.

  3. INSTALL SEAT TRACK INNER BRACKET COVER LH

    A01XIO1

    1. Attach the 6 clips to install the seat track inner bracket cover LH.

  4. INSTALL REAR SEAT OUTER TRACK BRACKET COVER

    A01XICY

    1. Move the cover in the direction of the arrow to attach the 2 guides.

    2. Attach the 2 claws to install the rear seat outer track bracket cover.

  5. INSTALL REAR SEAT TRACK INNER BRACKET COVER

    A01XIUJ

    1. Attach the 2 claws and guide to install the rear seat track inner bracket cover.

  6. INSTALL REAR SEAT HEADREST ASSEMBLY


    1. Install the rear seat headrest assembly.