REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type RH Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Remove the headrest.

  2. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER

    A01XK39

    1. Using a moulding remover, detach the 6 claws.

    2. Detach the 2 guides and remove the cover.

  3. REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER

    A01XMMO

    1. Using a moulding remover, detach the 6 claws.

    2. Detach the 2 guides and remove the cover.

  4. REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER


    1. A01XJFE

      Operate the reclining release handle to move the seat into the position shown in the illustration.

    2. A01XM48

      Using a moulding remover, detach the claw and remove the cover.

  5. REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER


    1. A01XFGZ

      Using a moulding remover, detach the claw and remove the cover.

  6. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

    A01XDIG

    1. Remove the 3 bolts, nut and seat.

      Note

      Be careful not to damage the vehicle body.