REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Remove the headrest.

  2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY


    1. Remove the headrest.

  3. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER

    A01XDFU

    1. Using a moulding remover, detach the 6 claws.

    2. Detach the 2 guides and remove the cover.

  4. REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER

    A01XK11

    1. Using a moulding remover, detach the 6 claws.

    2. Detach the 2 guides and remove the cover.

  5. REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER


    1. A01XKIA

      Operate the reclining release handle to move the seat into the position shown in the illustration.

    2. A01XGGC

      Using a moulding remover, detach the claw and remove the cover.

  6. REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER


    1. A01XFTI

      Using a moulding remover, detach the claw and remove the cover.

  7. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

    A01XHVG

    1. Remove the 3 bolts, nut and seat.

      Note

      Be careful not to damage the vehicle body.