CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
REMOVE REAR SEAT CUSHION HINGE COVER RH
Using a moulding remover, detach the 3 claws and remove the cover.
REMOVE REAR SEAT CUSHION HINGE COVER LH
Using a moulding remover, detach the 3 claws and remove the cover.
REMOVE REAR SEAT CUSHION ASSEMBLY LH
Pull the rear seat cushion band and release the lock.
Remove the 2 bolts and seat cushion.
Note
Be careful not to damage the vehicle body.
REMOVE REAR SEAT HEADREST ASSEMBLY
Remove the headrest.
REMOVE REAR SEATBACK COVER
Press the seatback lock release button to release the lock and fold down the seatback.
Using a screwdriver, detach the 4 claws and remove the cover.
Tech Tips
Tape the screwdriver tip before use.
REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH
Using a clip remover, detach the 5 clips.
Detach the 4 claws and remove the carpet.
REMOVE REAR SEATBACK ASSEMBLY LH
Remove the 2 bolts that secure the seatback to the floor.
Fold down the seatback, remove the bolt from the hinge, and then remove the seatback.
Note
Be careful not to damage the vehicle body.
REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH
Remove the bolt and hinge.
REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE LH
Using a moulding remover, detach the 6 claws.
Move the cover in the direction of the arrow to detach the 2 guides and remove the lever base.
Detach the cable clamp and disconnect the cable.
REMOVE REAR NO. 2 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat)
for Face to Face Seat Type:
Remove the rear No. 2 seat assembly Click here.
REMOVE REAR DOOR SCUFF PLATE LH
REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER
REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY
REMOVE REAR FLOOR REAR MAT SUPPORT PLATE
REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)
REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)
REMOVE REAR FLOOR CARPET ASSEMBLY
REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER
REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)
REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)
REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
REMOVE REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY LH
Remove the 2 bolts.
Detach the claw and remove the striker.
Note
Do not wipe off the grease on the sliding portion of the striker.
REMOVE REAR SEAT CUSHION LOCK STRIKER
Remove the 2 bolts and striker.