FRONT SEAT ASSEMBLY(for Bench Seat Type) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT SEAT HEADREST ASSEMBLY


    1. Remove the front seat headrest assembly.

  2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER RH


    1. Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.

    2. A01XM2O

      Using moulding remover A, detach the 2 claws and remove the front outer seat track bracket cover RH.

  3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER RH


    1. A01XG8E

      Using moulding remover A, detach the 2 claws and remove the front inner seat track bracket cover RH.

  4. REMOVE SEAT TRACK COVER RH


    1. Operate the seat track adjusting handle and move the front seat assembly RH to the foremost position.

    2. A01XEQK

      Using moulding remover A, detach the 2 claws and remove the seat track cover RH.

  5. REMOVE INNER SEAT TRACK BRACKET COVER RH


    1. A01XI5W

      Using moulding remover A, detach the 2 claws and remove the inner seat track bracket cover RH.

  6. REMOVE FRONT SEAT ASSEMBLY RH


    1. A01XDTW

      Remove the 2 bolts.

    2. Operate the seat track adjusting handle and move the seat to the rearmost position.

    3. A01XERA

      Remove the 2 bolts.

    4. Disconnect the connector and detach the wire harness clamp from under the seat.

    5. A01XL2S

      Remove the bolt and disconnect the anchor part of the front seat lap outer belt sub-assembly.

    6. A01XDENE01
      Text in Illustration
      *1 Rubber Band

      Pass the front seat lap outer belt sub-assembly through the rubber band of the front seat inner belt assembly RH.

    7. A01XGML

      Pull out the front seat lap outer belt sub-assembly through the hole of the front seat cushion, and remove the front seat lap outer belt sub-assembly.

    8. Operate the seat track adjusting handle and move the front seat assembly RH to the center position, and then operate the reclining adjusting handle and move the front seatback to the upright position.

    9. Remove the front seat assembly RH from the vehicle.

      Note

      Be careful not to damage the vehicle body.