FRONT SEAT ASSEMBLY(for Walk in Seat Type) REASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

PROCEDURE


  1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)

    Click here

  2. INSTALL FRONT SEAT LOWER CUSHION SHIELD RH


    1. Install the cushion shield with the screw.

  3. INSTALL FRONT SEAT CUSHION COVER RH


    1. Install the cover with the screw.

  4. INSTALL SEPARATE TYPE FRONT SEATBACK PAD


    1. Install the seatback pad.

  5. INSTALL FRONT SEATBACK HEATER ASSEMBLY RH (w/ Seat Heater System)

    Click here

  6. INSTALL SEPARATE TYPE FRONT SEATBACK COVER


    1. Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      Tech Tips

      The number of hog rings differs according to seat type.

      B001G24E01
      Text in Illustration
      *A for Type A *B for Type B
      *1 Hog Ring Pliers - -

    2. Attach the 4 claws to install the 2 headrest supports.

    3. B001ENO

      w/ Front Seat Side Airbag:


      1. Connect the seatback cover bracket to the seatback pad.

      2. Install the seatback cover bracket to the seat frame with the nut.

        Torque:
        5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

        Note

        After the seatback trim cover is assembled, make sure the side airbag strap is not twisted.

    4. Close the 2 fasteners, and then close the seatback cover.

      B001GUIE01
      Text in Illustration
      *A for Cloth Seat *B for Leather Seat
    5. B001ICIE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install 3 new hog rings.

  7. INSTALL RECLINING ADJUSTER INSIDE COVER LH

    A01XIX5

    1. Move the cover in the direction of the arrow to install the cover.

    2. Attach the guide.

  8. INSTALL RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL FRONT SEAT WIRE RH


    1. Install the seat wire.

  10. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY RH (w/ Seat Heater System)

    Click here

  11. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH

    B001H5TE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Move the protector in the direction of the arrow to attach the hook and 2 guides and install the protector.

    2. Install the screw.

  12. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH

    B001EHLE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Move the protector in the direction of the arrow to attach the hook and guide and install the protector.

    2. Attach the clip.

    3. Install the screw.

  13. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY RH (w/ Seat Heater System)

    Click here

  14. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

    B001CPLE01
    Text in Illustration
    *1 Hog Ring Pliers

    1. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  15. INSTALL SEAT CUSHION COVER WITH PAD


    1. Install the seat cushion cover with pad.

    2. Attach the claw to connect the connector.

    3. Install the clip.

    4. w/ Seat Heater System:

      Connect the seat heater connector and attach the 3 wire harness clamps.

  16. INSTALL CAP


    1. Install the 2 caps.

  17. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. Install the seatback assembly with the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. Attach the hook.

    3. Attach the cable clamp to connect the cable.

    4. w/ Front Seat Side Airbag:


      1. Connect the airbag wire harness.

      2. Attach the fastening tape to close the cover.

      3. Attach the 3 airbag wire harness clamps.

      4. Attach the claw and connect the airbag connector.

    5. w/ Seat Heater System:

      Connect the seat heater connector and attach the wire harness clamp.

    6. Install the rubber band to the seat cushion spring.

  18. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

    Click here

  19. INSTALL FRONT SEAT INNER CUSHION SHIELD RH


    1. Attach the 5 claws to install the cushion shield.

  20. INSTALL FRONT SEAT CUSHION SHIELD RH


    1. Attach the cable clamp.

    2. Attach the 2 clips and 5 claws to install the cushion shield.

    3. Install the screw.

  21. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

    A01XKKS

    1. Attach the claw to install the handle.