FRONT SEAT ASSEMBLY(for Walk in Seat Type) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

PROCEDURE


  1. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

    B001GEZE01
    Text in Illustration
    *1 Protective Tape

    1. Raise the reclining adjuster release handle to reveal the claw. Using a screwdriver, detach the claw and remove the handle.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE FRONT SEAT CUSHION SHIELD RH

    A01XIWD

    1. Remove the screw.

    2. Using a moulding remover, detach the 5 claws and 2 clips.

    3. Detach the cable clamp and remove the cushion shield.

  3. REMOVE FRONT SEAT INNER CUSHION SHIELD RH

    A01XHW2

    1. Using a moulding remover, detach the 5 claws and remove the cushion shield.

  4. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

    Click here

  5. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. B001GLQ

      Remove the rubber band from the seat cushion spring.

    2. A01XFBM

      w/ Seat Heater System:

      Disconnect the seat heater connector and detach the wire harness clamp.

    3. B001DFKE01
      Text in Illustration
      *1 Fastening Tape

      w/ Front Seat Side Airbag:


      1. Detach the claw and disconnect the airbag connector.

      2. Detach the 4 airbag wire harness clamps.

      3. Detach the fastening tape and open the cover.

      4. Disconnect the airbag wire harness.

    4. A01XLLA

      Detach the hook.

    5. A01XEPT

      Detach the cable clamp and disconnect the cable from the seatback.

    6. A01XFHB

      Remove the 4 bolts and seatback assembly.

  6. REMOVE CAP

    A01XDOS

    1. Remove the 2 caps.

  7. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01XLGR

      Using a clip remover, remove the clip.

    2. A01XIJX

      w/ Seat Heater System:

      Disconnect the seat heater connector and detach the 3 wire harness clamps.

    3. Detach the hooks.

    4. B001HD5

      Detach the claw and disconnect the connector.

    5. Remove the seat cushion cover with pad.

  8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

    B001FTI

    1. Remove the hog rings and seat cushion cover from the seat cushion pad.

  9. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH (w/ Seat Heater System)

    Click here

  10. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH

    B001GGYE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the screw.

    2. Move the protector in the direction of the arrow to detach the hook and 2 guides and remove the protector.

  11. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH

    B001F1RE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the screw.

    2. Using a clip remover, detach the clip.

    3. Move the protector in the direction of the arrow to detach the hook and guide and remove the protector.

  12. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY RH (w/ Seat Heater System)

    Click here

  13. REMOVE FRONT SEAT WIRE RH


    1. Remove the seat wire.

  14. REMOVE RECLINING ADJUSTER INSIDE COVER LH

    A01XCWT

    1. Detach the guide.

    2. Move the cover in the direction of the arrow to remove it.

  15. REMOVE RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01XKHH

      Remove the 3 hog rings.

    2. Open the 2 fasteners, and then open the seatback cover.

      B001D85E01
      Text in Illustration
      *A for Cloth Seat *B for Leather Seat
    3. A01XEYO

      w/ Front Seat Side Airbag:


      1. Remove the nut and seatback cover bracket from the seat frame.

      2. Disconnect the seatback cover bracket from the seatback pad.

    4. B001I6P

      Using a screwdriver, detach the 4 claws and remove the 2 headrest supports.

    5. Remove the hog rings and seatback cover.

      Tech Tips

      The number of hog rings differs according to seat type.

      B001EI4E01
      Text in Illustration
      *A for Type A *B for Type B

  17. REMOVE FRONT SEATBACK HEATER ASSEMBLY RH (w/ Seat Heater System)

    Click here

  18. REMOVE SEPARATE TYPE FRONT SEATBACK PAD


    1. Remove the seatback pad.

  19. REMOVE FRONT SEAT CUSHION COVER RH

    A01XG4B

    1. Remove the screw and cover.

  20. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH

    A01XCYP

    1. Remove the screw and cushion shield.

  21. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)

    Click here