FRONT SEAT ASSEMBLY(for Manual Seat) REASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)

    Click here

  2. INSTALL NO. 2 SEAT WIRE (for Driver Side)


    1. Attach the 2 clamps to install the seat wire.

    2. Connect the connector.

  3. INSTALL SEPARATE TYPE FRONT SEATBACK PAD


    1. Install the seatback pad.

  4. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System)

    Click here

  5. INSTALL SEPARATE TYPE FRONT SEATBACK COVER


    1. Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      Tech Tips

      The number of hog rings differs according to seat type.

      B001G24E01
      Text in Illustration
      *A for Type A *B for Type B
      *1 Hog Ring Pliers - -

    2. Attach the 4 claws to install the 2 headrest supports.

    3. B001ENO

      w/ Front Seat Side Airbag:


      1. Connect the seatback cover bracket to the seatback pad.

      2. Install the seatback cover bracket to the seat frame with the nut.

        Torque:
        5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

        Note

        After the seatback trim cover is assembled, make sure the side airbag strap is not twisted.

    4. Close the 2 fasteners, and then close the seatback cover.

      B001GUIE01
      Text in Illustration
      *A for Cloth Seat *B for Leather Seat
    5. B001FURE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install 3 new hog rings.

  6. INSTALL RECLINING ADJUSTER INSIDE COVER LH

    A01XIX5

    1. Move the cover in the direction of the arrow to install the cover.

    2. Attach the guide.

  7. INSTALL RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. INSTALL FRONT SEAT WIRE LH


    1. Install the seat wire.

  9. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY LH (w/ Seat Heater System)

    Click here

  10. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH

    B001E46

    1. Move the protector in the direction of the arrow to attach the hook and install the protector.

    2. Install the screw.

  11. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. INSTALL FRONT SEAT LOWER CUSHION SHIELD LH


    1. Attach the hook and clip to install the cushion shield.

    2. Install the screw.

  13. INSTALL FRONT SEAT LOWER CUSHION SHIELD RH


    1. Attach the hook and clip to install the cushion shield.

    2. Install the screw.

  14. INSTALL RECLINING ADJUSTER INSIDE COVER LH


    1. Attach the claw and guide to install the cover.

  15. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)

    Click here

  16. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

    B001CPLE01
    Text in Illustration
    *1 Hog Ring Pliers

    1. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. B001EQFE01
      Text in Illustration
      *1 Hog Ring Pliers

      Type A:


      1. Using hog ring pliers, connect the straps with new hog rings.

    3. B001I7CE01
      Text in Illustration
      *1 Tack Pin

      Type B:


      1. Connect the straps with new tack pins.

  17. INSTALL SEAT CUSHION COVER WITH PAD


    1. Install the seat cushion cover with pad.

    2. for Front Passenger Side:

      Attach the claw to connect the connector.

    3. Attach the hooks.

    4. w/ Seat Heater System:

      Connect the seat heater connector and attach the 3 wire harness clamps.

  18. INSTALL FRONT SEAT LEG COVER LH

    B001CN2

    1. Move the cover in the direction of the arrow to install the cover.

    2. Attach the 2 claws.

  19. INSTALL CAP


    1. Install the 2 caps.

  20. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. Install the seatback assembly with the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. w/ Front Seat Side Airbag:


      1. Connect the airbag wire harness.

      2. Attach the fastening tape to close the cover.

      3. Attach the 3 airbag wire harness clamps.

      4. Attach the claw and connect the airbag connector.

    3. for Clip Type:

      Install the 2 clips.

    4. for Hook Type:

      Attach the 2 hooks.

    5. w/ Seat Heater System:

      Connect the seat heater connector and attach the wire harness clamp.

    6. for Driver Side:

      Attach the clamp to connect the No. 2 seat wire.

    7. Install the rubber band to the seat cushion spring.

  21. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH


    1. for Driver Side:

      Click here

    2. for Front Passenger Side:

      Click here

  22. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    B001F3X

    1. Attach the 3 claws to install the cushion shield.

  23. INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side)


    1. Attach the 4 claws to install the cushion shield.

  24. INSTALL LUMBAR SWITCH ASSEMBLY (for Driver Side)

    Click here

  25. INSTALL FRONT SEAT CUSHION SHIELD LH


    1. for Driver Side:

      Attach the 5 wire harness clamps and connect the 2 connectors.

    2. A01XF87

      Attach the 4 claws and clip to install the cushion shield.

    3. Install the screw.

  26. INSTALL VERTICAL ADJUSTING HANDLE LH (for Driver Side)


    1. Install the handle with the screw.

  27. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    A01XJ8X

    1. Attach the claw to install the handle.