REAR NO. 2 SEAT ASSEMBLY(for Manual Seat Type LH Side) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Remove the headrest.

  2. REMOVE CAP


    1. A01XI4Y

      Remove the 2 caps.

  3. REMOVE REAR SEAT LOWER CUSHION HINGE COVER LH


    1. A01XGVT

      Remove the 2 screws.

    2. Detach the 3 claws and remove the cover.

  4. REMOVE REAR SEAT LOWER CUSHION HINGE COVER RH


    1. A01XEQ4E01
      Text in Illustration
      *1 Guide

      Remove the 2 screws.

    2. Detach the 2 claws and guide and remove the cover.

  5. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH

    Click here

  6. REMOVE REAR NO. 1 SEAT CUSHION MOULDING


    1. A01XLKIE01
      Text in Illustration
      *1 Guide

      Using a clip remover, remove the 2 clips.

    2. Detach the 2 claws and 4 guides and remove the moulding.

  7. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01XCJME01
      Text in Illustration
      *1 Fastener

      Open the 2 fasteners.

    2. A01XCDF

      Using a clip remover, remove the 2 clips and open the under part of the seat cushion cover.

    3. A01XC9DE01
      Text in Illustration
      *1 Hook

      Detach the 2 hooks and remove the seat cushion cover with pad.

  8. REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH


    1. A01XGIRE01
      Text in Illustration
      *1 Fastener

      Detach the fastener.

    2. Remove the hog rings and seat cushion cover.

  9. REMOVE REAR SEAT CUSHION INNER EDGE PROTECTOR LH


    1. A01XIXZE01
      Text in Illustration
      *1 Tack Pin

      Cut off the tack pins and remove the edge protector from the seat cushion pad.

  10. REMOVE REAR NO. 2 SEAT CUSHION MOULDING


    1. A01XJ10

      Remove the 2 screws.

    2. Detach the 2 claws and remove the moulding.

  11. REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH


    1. Operate the rear No. 2 seat lock control lever and retract the seat cushion frame.

    2. A01XJY6

      Using a T40 "TORX" socket wrench, remove the 4 "TORX" bolts and remove the seat cushion frame.

  12. REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH


    1. A01XMNLE01
      Text in Illustration
      *1 Guide

      Remove the 3 clips.

    2. Detach the 2 claws and 4 guides and remove the 3rd seat link.

  13. REMOVE REAR NO. 2 SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    1. A01XCOZE01
      Text in Illustration
      *1 Cable End
      *2 Clamp

      Detach the clamp.

    2. Twist the cable end in the direction indicated by the arrow and disconnect the cable.

    3. A01XLN2E01
      Text in Illustration
      *1 Guide

      Remove the screw.

    4. Detach the 2 guides and remove the lever.

  14. REMOVE REAR SEAT LEG COVER LH


    1. A01XHAUE01
      Text in Illustration
      *1 Hook

      Remove the clip.

    2. Detach the 3 hooks and 5 clips and remove the cover.

  15. REMOVE REAR NO. 3 SEAT LEG COVER LH


    1. A01XLLQ

      Detach the 2 claws and remove the cover.

  16. REMOVE REAR SEAT CUSHION INNER HINGE COVER LH


    1. A01XKZWE01
      Text in Illustration
      *1 Guide

      Remove the screw and clip.

    2. Detach the guide and remove the cover.

  17. REMOVE REAR SEAT CUSHION INNER HINGE COVER RH


    1. A01XMJXE01
      Text in Illustration
      *1 Guide

      Remove the screw and clip.

    2. Detach the guide and remove the cover.

  18. REMOVE REAR SEAT LOCK CONTROL CABLE LH


    1. A01XCO3E01
      Text in Illustration
      *1 Clamp
      *2 Cable End

      Detach the clamp.

    2. Twist the cable end in the direction indicated by the arrow and remove the cable.

  19. REMOVE REAR NO. 1 SEATBACK LOCK STRIKER COVER


    1. A01XDB6E01
      Text in Illustration
      *1 Guide
      *2 Protective Tape

      Using a screwdriver, detach the claw and guide and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  20. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    1. A01XI3NE01
      Text in Illustration
      *1 Clamp
      *2 Cable End
      *3 Guide

      Remove the 2 screws.

    2. Detach the guide and remove the lever.

    3. Detach the clamp.

    4. Twist the cable end in the direction indicated by the arrow and disconnect the cable.

  21. REMOVE ROPE HOOK ASSEMBLY


    1. A01XCOWE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and open the cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01XET5

      Remove the bolt and rope hook.

  22. REMOVE REAR NO. 2 SEATBACK LOCK STRIKER COVER


    1. A01XDBWE01
      Text in Illustration
      *1 Guide
      *2 Protective Tape

      Using a screwdriver, detach the claw and guide and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  23. REMOVE REAR SEAT LOCK RELEASE LEVER ASSEMBLY


    1. A01XE29E01
      Text in Illustration
      *1 Hook

      Remove the 2 screws.

    2. Detach the hook and remove the lever.

    3. A01XMIJE01
      Text in Illustration
      *1 Cable End
      *2 Clamp

      Detach the 2 clamps.

    4. Twist the 2 cable ends in the direction indicated by the arrow and disconnect the 2 cables.

  24. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH


    1. A01XM51

      Detach the 7 clips and remove the board.

  25. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY


    1. A01XM5T

      Detach the 4 claws and remove the 2 headrest supports.

  26. REMOVE SEATBACK COVER WITH PAD


    1. A01XD2XE01
      Text in Illustration
      *1 Hook

      Detach the hooks and remove the seatback cover with pad.

  27. REMOVE REAR NO. 3 SEATBACK COVER SUB-ASSEMBLY LH


    1. A01XFKM

      Remove the hog rings and seatback cover.

  28. REMOVE REAR NO. 2 SEATBACK EDGE PROTECTOR


    1. A01XD1SE01
      Text in Illustration
      *1 Tack Pin

      Cut off the tack pins and remove the protector from the seatback pad.

  29. REMOVE NO. 2 SEATBACK COVER


    1. A01XHRW

      Detach the 2 claws and remove the cover.

  30. REMOVE REAR NO. 3 SEAT INNER RECLINING COVER LH


    1. A01XHB1

      Detach the 4 claws and remove the cover.

  31. REMOVE REAR NO. 3 SEAT OUTER RECLINING COVER LH


    1. A01XI8ME01
      Text in Illustration
      *1 Guide

      Remove the screw.

    2. Detach the guide and 2 claws and remove the cover.

  32. REMOVE REAR NO. 2 SEAT INNER RECLINING COVER LH


    1. A01XIB1

      Detach the 5 claws and remove the cover.

  33. REMOVE REAR NO. 2 SEAT OUTER RECLINING COVER LH


    1. A01XJGIE01
      Text in Illustration
      *1 Guide

      Remove the screw.

    2. Detach the guide and 2 claws and remove the cover.

  34. REMOVE FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY


    1. A01XJ6GE03
      Text in Illustration
      *1 Clamp A
      *2 Clamp B
      *3 Cable Tie
      *4 Cable End

      Remove the clamp labeled B and detach the 2 labeled clamps A.

    2. Cut off the 2 cable ties.

    3. Twist the cable end in the direction indicated by the arrow and remove the cable.

  35. REMOVE NO. 2 SEAT LOCK CABLE


    1. A01XFPGE01
      Text in Illustration
      *1 Clamp
      *2 Cable End

      Detach the clamp.

    2. Twist the cable end in the direction indicated by the arrow and remove the cable.

  36. REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH


    1. A01XH2B

      Using a T45 "TORX" socket wrench, remove the 4 "TORX" bolts and frame.

  37. REMOVE NO. 3 SEAT LEG ASSEMBLY LH


    1. A01XDN0

      Remove the 4 clips and seat cushion under carpet LH from the No. 3 seat leg.

  38. REMOVE NO. 2 SEAT LEG ASSEMBLY (for RH Side)


    1. A01XKMT

      Remove the 4 clips and seat cushion under carpet RH from the No. 2 seat leg.