REAR NO. 2 SEAT ASSEMBLY(for Manual Seat Type LH Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY


    1. Operate the 2 rear seat lock release levers and fold down the 2 seatbacks.

    2. A01XJYHE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and open the cover.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Use the same procedure to open the cover on the other side.

    3. A01XDMI

      Remove the 2 bolts.

    4. Detach the 4 clips and remove the deck board.

  2. REMOVE REAR NO. 4 FLOOR BOARD


    1. A01XCV5E01
      Text in Illustration
      *1 Guide

      Using a moulding remover, detach the clip and 3 claws.

    2. Detach the 2 guides and remove the floor board.

  3. REMOVE REAR NO. 3 FLOOR BOARD (w/o Rear Air Conditioning System)


    1. A01XIBOE01
      Text in Illustration
      *1 Guide

      Using a moulding remover, detach the clip and 4 claws.

    2. Detach the 2 guides and remove the floor board.

  4. REMOVE REAR NO. 3 FLOOR BOARD (w/ Rear Air Conditioning System)


    1. A01XGFDE01
      Text in Illustration
      *1 Guide

      Using a moulding remover, detach the clip and 3 claws.

    2. Detach the 2 guides and remove the floor board.

  5. REMOVE REAR FLOOR MAT SUPPORT PLATE


    1. Remove the 3 bolts.

      A01XJSNE01
      Text in Illustration
      *1 Guide - -

    2. Detach the 4 claws and 2 guides.

    3. Detach the 5 clips and remove the support plate.

  6. REMOVE DECK BOARD BRACKET REINFORCEMENT


    1. A01XGRXE01
      Text in Illustration
      *1 Hook

      Remove the 2 bolts.

    2. Detach the 2 hooks and remove the reinforcement.

  7. REMOVE NO. 1 DECK BOARD BRACKET LH


    1. A01XGOI

      Remove the 2 bolts and bracket.

  8. REMOVE REAR NO. 2 SEAT ASSEMBLY LH


    1. Operate the rear seat lock release lever and raise the seatback.

    2. Pull out the seat cushion.

    3. A01XI77

      Remove the 2 bolts.

    4. A01XLBEE03
      Text in Illustration
      *1 Protective Tape
      *2 Guide

      Using a screwdriver, detach the 2 guides and 6 claws and open the 2 covers.

      Tech Tips

      Tape the screwdriver tip before use.

    5. A01XH5Z

      Remove the 2 bolts.

    6. A01XCFQ

      Remove the rear No. 2 seat assembly from the vehicle.

      Note

      Be careful not to damage the vehicle body.

      Tech Tips

      If removing the seat on the RH side with the LH side installed, remove it with the rear seat leg cover LH raised as shown in the illustration.