FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM

   Tech Tips

   The following items can be customized.

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Record the current settings before customizing.

   
   

   1. Customizing with the GTS.

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Seat.

      5. Select the setting by referring to the table below.

         Tester Display	Default	Content	Setting	Relevant ECU
         Seat Travel Distance	Normal	Allows customizing of the seat movement distance for the power easy access system.	OFF or Short or Normal	Main body ECU (Multiplex network body ECU)

   2. Customizing with the Multi-display

      Tech Tips

      The following items can be customized.

      Note

      
      

      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Record the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.

      
      

      1. Turn the ignition switch to ON.

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Other vehicle settings.

      3. Select the setting by referring to the table below.

         Display	Default	Content	Setting	Relevant ECU
         Driver's seat easy exit	Full	Allows customization of the seat movement distance for the power easy access system.	Full or Partial or Off	Main body ECU (Multiplex network body ECU)