PRE-CRASH SAFETY SYSTEM WARNING BUZZER INSTALLATION

PROCEDURE

1. INSTALL SKID CONTROL BUZZER ASSEMBLY

   
   

   1. Connect the connector.

      Note

      Securely connect the connector.

   2. Attach the clamp to install the skid control buzzer assembly.

      Note

      
      

      • Securely insert the clamp into the dash panel.

      • If the buzzer is dropped, replace it.

2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here