AIRBAG CUT-OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A01XMGRE06
      Text in Illustration
      *a

      Component without harness connected

      (Airbag Cutoff Switch Cylinder Sub-assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (MSW-) - 2 (MSW+)

      Cutoff switch on

      (Open)

      		 400 Ω

      Cutoff switch off

      (Closed)

      		 100 Ω

      If the result is not as specified, replace the airbag cutoff switch cylinder.