REAR AIRBAG SENSOR(for 5 Door) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)


    1. for Manual Seat Type LH Side:


      1. Remove the rear No. 2 seat assembly Click here.

    2. for Power Seat Type LH Side:


      1. Remove the rear No. 2 seat assembly Click here.

    3. for Face to Face Seat Type:


      1. Remove the rear No. 2 seat assembly Click here.

  3. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

    Click here

  4. REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)

    Click here

  5. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  7. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  8. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

    Click here

  9. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  10. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

    Click here

  11. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

  12. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

  13. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  14. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  15. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  16. REMOVE NO. 1 TONNEAU COVER HOLDER CAP

    Click here

  17. REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

    Click here

  18. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

  19. REMOVE FRONT DECK SIDE TRIM COVER

    Click here

  20. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  21. REMOVE REAR AIRBAG SENSOR LH


    1. B001D0S

      Remove the nut and rear airbag sensor.

    2. Disconnect the connector.