CAN COMMUNICATION SYSTEM(for RHD without Entry and Start System) SYSTEM DIAGRAM


  1. SYSTEM DIAGRAM (for 1KD-FTV)

    A01XEGPE01
    No. ECU/Sensor Name
    1 Combination meter assembly
    2 Network gateway ECU*1
    3 Main body ECU (multiplex network body ECU)
    4 DLC3
    5 Yaw rate sensor assembly
    6 Center airbag sensor assembly
    7 Radio and display receiver assembly*2
    8 Spiral cable sub-assembly (steering angle sensor)
    9 Power steering ECU assembly
    10 Four wheel drive control ECU
    11 Master cylinder solenoid (skid control ECU)
    12 Air conditioning amplifier assembly
    13 ECM
    14 Clearance warning ECU assembly*1
    15 No. 5 junction connector*1

    • *1: w/ TOYOTA Parking Assist-sensor System (for 4 Sensor Type)

    • *2: w/ Audio and Visual System (for Radio and Display Type)

  2. SYSTEM DIAGRAM (for 5L-E)

    A01XFGTE01
    *1 V1 Bus
    *2 CAN Main Wire
    *3 CAN Branch Wire
    *4 Terminating Resistor
    No. ECU/Sensor Name
    1 Combination meter assembly
    2 Main body ECU (multiplex network body ECU)
    3 DLC3
    4 Yaw rate sensor assembly
    5 Center airbag sensor assembly
    6 Air conditioning amplifier assembly
    7 Four wheel drive control ECU
    8 Brake actuator assembly (skid control ECU)
    9 ECM

  3. V1 BUS (for 1KD-FTV)

    A01XMRWE02
    A01XJ81E01

  4. V1 BUS (for 5L-E)

    A01XI03E02

  5. V2 BUS (w/ TOYOTA Parking Assist-sensor System [for 4 Sensor Type])

    A01XLQZE01