CAN COMMUNICATION SYSTEM(for LHD with Entry and Start System) DIAGNOSTIC TROUBLE CODE CHART

Tech Tips

If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.

CAN Communication System
DTC Code Detection Item See page
U0100 Lost Communication with ECM / PCM "A"

Click here

U0104 Lost Communication with Driving Support ECU

Click here

U010E/A2 Lost Communication with Reductant Control Module

Click here

U0132 Lost Communication with Ride Level Control Module

Click here

U0139 Lost Communication with Suspension Control Module B

Click here

U0164 Lost Communication with A/C ECU

Click here

U0182 Lost Communication with AFS ECU

Click here

U0208 Lost Communication with "Seat Control Module A"

Click here

U0233 Lost Communication with Blind Spot Monitor Master Module

Click here

U029D/A2 Lost Communication with NOx Sensor "A"

Click here

U1002 Lost Communication with Gateway Module (Power Management1)

Click here

U1002 Lost Communication with Gateway Module (Power Management2)

Click here

U1002 Lost Communication with Gateway Module (MS Bus)

Click here

U1002 Lost Communication with Gateway Module (Sensor Bus)

Click here

U1100 Lost Communication with Seat Belt Control ECU

Click here

U110B Lost Communication with Parking Assist Control Module "B"

Click here

U1110 Lost Communication with Clearance Sonar Module

Click here

U1114 Lost Communication with Main Switch Module

Click here

U1115 Lost Communication with Tilt and Telescopic Module

Click here