INTEGRATION RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTEGRATION RELAY (for 5L-E)


    1. B001FHQC01
      *a

      Component with harness connected

      (No. 1 Integration Relay)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1A-8 - 1C-1 Battery voltage is not applied to terminals 1C-1 and 1A-7 10 kΩ or higher
      1A-8 - 1C-1 Battery voltage is applied to terminals 1C-1 and 1A-7 Below 1Ω

      If the result is not as specified, replace the No. 1 integration relay.