PROCEDURE
INSTALL BLIND SPOT MONITOR BUZZER
Attach the clamp to install the blind spot monitor buzzer.
Connect the connector.
INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)
INSTALL ASSIST GRIP PLUG (w/ Rear No. 2 Seat)
INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)
INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER
INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)
INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)
INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)
INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)
INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)
INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
INSTALL REAR DOOR SCUFF PLATE LH
INSTALL QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)
INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)
INSTALL REAR NO. 1 SEATBACK ASSEMBLY (w/ Rear No. 1 Seat)
for 60/40 Split Double-folding Seat Type LH Side:
Install the rear No. 1 seatback assembly Click here.
for 60/40 Split Double-folding Seat Type RH Side:
Install the rear No. 1 seatback assembly Click here.
INSTALL REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)
for 60/40 Split Slide Walk-in Seat Type LH Side:
Install the rear No. 1 seat assembly Click here.
for 60/40 Split Slide Walk-in Seat Type RH Side:
Install the rear No. 1 seat assembly Click here.
INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)
for Manual Seat Type:
Install the rear No. 2 seat assembly Click here.
for Power Seat Type:
Install the rear No. 2 seat assembly Click here.
for Face to Face Seat Type:
Install the rear No. 2 seat assembly Click here.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.