BLIND SPOT MONITOR SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note


  • Avoid any impact to the blind spot monitor sensor.

  • Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.

PROCEDURE


  1. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)

    Click here

  2. REMOVE JACK BOX HOLE COVER

    Click here

  3. REMOVE REAR BUMPER BAR PLATE

    Click here

  4. REMOVE BACK DOOR CHECK

    Click here

  5. REMOVE NO. 1 REAR BUMPER PLATE

    Click here

  6. REMOVE REAR QUARTER PANEL MUDGUARD LH

    Click here

  7. REMOVE REAR QUARTER PANEL MUDGUARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE REAR BUMPER COVER

    Click here

  9. REMOVE BLIND SPOT MONITOR SENSOR LH


    1. B001GNQ

      Disconnect the connector.

    2. Remove the 3 nuts and blind spot monitor sensor LH.

  10. REMOVE BLIND SPOT MONITOR SENSOR RH


    1. B001DU9

      Disconnect the connector.

    2. Remove the 3 nuts and blind spot monitor sensor RH.