TELEVISION CAMERA(for Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH

    Click here

  2. REMOVE OUTER REAR VIEW MIRROR GLASS

    Click here

  3. REMOVE OUTER MIRROR COVER LH

    Click here

  4. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

    Click here

  5. REMOVE SIDE TELEVISION CAMERA ASSEMBLY


    1. B001GZWC02
      *a Tape
      *b Clamp

      Remove the tape and detach the clamp.

    2. B001G5T

      Remove the screw, detach the 4 claws and disconnect the outer rear view mirror gasket LH.

      Tech Tips

      It is not necessary to completely remove the outer rear view mirror gasket LH. Slightly move the outer rear view mirror gasket LH so that the lower mirror cover can be removed in a later step.

    3. Remove the lower mirror cover.


      1. B001FVTC04
        B001CE2 Protective Tape

        Put protective tape around the lower mirror cover.

        Tech Tips

        The claws of the mirror will be detached in the order shown in the illustration in the following steps.

        B001GQDN01
      2. B001GVYC02
        B001CE2 Protective Tape

        Using a screwdriver, detach the claw.

        Tech Tips

        Tape the screwdriver tip before use.

      3. B001HGPC02
        B001CE2 Protective Tape

        Using a screwdriver, detach the claw.

        Tech Tips

        Tape the screwdriver tip before use.

      4. B001FP2C02
        B001CE2 Protective Tape

        Using a screwdriver, detach the claw to create a space between the lower mirror cover and mirror body as shown in the illustration.

        Tech Tips

        Tape the screwdriver tip before use.

      5. B001CG2C04
        B001CE2 Protective Tape

        Insert a screwdriver as shown in the illustration.

        Tech Tips

        Tape the screwdriver tip before use.

      6. B001FMKC04
        B001CE2 Protective Tape

        Detach the claw to create a space between the lower mirror cover and mirror body as shown in the illustration.

        Tech Tips

        Tape the screwdriver tip before use.

      7. B001GWF

        While moving the lower mirror cover back and forth in the directions of the arrows in the illustration, detach the 2 claws and remove the lower mirror cover.

    4. B001FZJ

      Using a T25 "TORX" socket wrench, remove the 3 "TORX" screws.

    5. B001E9N

      Remove the 5 screws and outer mirror body.

    6. B001CXSC02
      *a Guide

      Detach the guide and remove the cover body.

      Note

      Be careful as the guide shown in the part of the illustration is easily damaged.

    7. B001IHYC01
      B001CE2 Protective Tape

      Using a screwdriver, disconnect the connector.

      Note

      When disconnecting the connector, be careful not to damage it.

      Tech Tips

      Tape the screwdriver tip before use.

    8. B001DMI

      Detach the clamp.

    9. Remove the 2 screws and side television camera assembly.